Easy Vintage Hair Scarf Sewing Pattern

Oh hey, I'm just fixing my hair in my new hairscarf.

Do you love the vintage pinup look but, don't know where to start? Grab some peddle pushers, a black fitted top, and this sewing pattern! You're about to get your vintage style on. 
This pattern is the straw that broke the camel's back- in a good way. I have quite a few patterns I want to share but, I lacked the technical know-how to get them to you. This is the pattern that made me search the interwebs, far and wide on how to create a PDF. And, here it is! Finally a downloadable pattern that was made just for you!

This wide hair scarf is good hair days, bad hair days, and for the curly haired gals too! I see you (I am a curly girl). Toss your hair up in a messy bun, and you'll be cute as a button when you wear this retro inspired hairscarf. This isn't a lifesaver but, it's definitely a hair saver. 

If this thicker style headband isn't your cup of tea, I have a post on a narrower one, over here. It can be worn with your hair up or down. You can tie it around your neck, wrist, or use it as a purse accent when tied in a bow. The size is completely customizable too, lengthen or shorten it to your desired size


Okay, lets get started on the Wide Hair Scarf Pattern. 

What You'll Need:

1. 1/2 yard of cotton fabric
2. The Pattern
3. Sewing machine 
4. Clips or pins, ruler, chalk pen
5. Matching or contrasting thread
6. Chopstick or other turning tool
7. A smile, because you're making something cute :)

Let's get sewing! 

Download the PDF pattern, print it out (*do not scale or resize), and tape it together. This will now be your pattern piece. Make sure to match up the star points. Cut out the pattern along the lines and set it aside. It will resemble a plague mask at this point. Haha, perfect for the year we've had. ;)

*The pattern will print out on 2 horizontal pages. They are made to overlap a bit to create the pattern. Match the star and you'll be good to go. No scaling or anything is necessary. If you'd like to trim off a thin sliver of paper to match the star up perfectly, you can. That's what I did. 

I trimmed off a thin slice of paper to match my star up perfectly.

Cut along the line just like in grade school. ;)

Once it's cut, it'll resemble a plague mask!

I chose this fun atomic print cotton fabric. It's going to make the cutest retro hair scarf.

Next, wash, dry, and iron your fabric if you haven't already.

​What fabric(s) did you choose? Did you go with a solid color or a fun novelty print? 
​

Use pattern weights to hold the fabric and pattern down while you trace.

• Grab your scarf pattern piece and lay it on top of your folded fabric. Line up the folded edge of the fabric with the pattern side that says FOLD. You can do this with RST or WST, it won't make a difference for this pattern.
• Use pattern weights to hold the piece down, while you trace out the shape. Use an air soluble pen or a chalk pen to trace. Cut along the lines.
• Repeat steps for the other side. You are tracing an outer and inner piece of fabric for your hair scarf. Cut.
• You should now have 2 pieces of fabric cut out.

Trace the pattern onto your fabric.

Cut the piece out and set aside.

Trace the second piece and cut. You could use the same fabric or a contrasting one.

• Now take the pieces and place right sides together. Use pins or clips to hold them together.
• Mark a 3" gap where the pattern piece indicates. This area will not be sewn so, you can turn the scarf out afterwards.

Match the pieces together and pin.

Pin or clip pieces together.

• I took an air soluble pen to mark the pivot point on the scarf. This isn't necessary, but it helped. The pivot point is where the scarf gets narrower. 

• Time to sew! Use a 2.5 or 3mm stitch length. 
• Seam allowance is 1/4"
• Go slow, this gets tricky at the pointy ends

Go slow in the corner area. Stitch until you are 1/4" from the pointed end.

Once you get to the point, lift your pressure foot, turn the scarf, then continue down the other side.

Continue sewing...

• When you get to the pointy corners, leave the needle down, lift the pressure foot, and turn your fabric. If it's not quite at 1/4" mark, go back and hand crank a stitch or two. Continue sewing all the way around until you come to the 3 inch gap. Backstitch.
• Clip your corners.

Leave an opening to turn the scarf out.

Clip the corners to take away the bulk. This will create nice sharp corners.

• Time to turn the scarf out. Grab a chopstick or any other turning tool.

I love my EZ point & turner tool.

Using the blunt end, push and create a donut like effect. Then, gently pull the fabric down and around the chopstick.

I love my chopstick too! Grab your chopstick for this part.

Push and pull gently, until the fabric goes through the opening. Repeat with the other end.

If you're using a chopstick or pencil, poke the blunt end into the pointed fabric corner. Slowly pull the fabric down around the chopstick until you can easily push it through to the gap opening. Repeat for the other side.

It should look like this once it's turned out! Huzzah! The rest is downhill from here.

It'll look like this once it's turned out. Time to press it flat.

Iron time! 

• Roll the seam out. Using your fingernail seems to help this process. You can also take the chopstick and slide it under the seams while pushing the seam out and open as well. It'll take some finagling, but it's well worth it in the end.

Press the seams flat.

I use the pointy end of a chopstick to push the seam out. This helps to iron it nice and flat.

Back to the sewing machine to topstitch the gap closed. 

• Topstitch 1/8" from the edge, backstitching at the beginning and end. If you'd like to topstitch around the whole hairscarf, you can. 
• Clip any loose threads.
  
• Press the scarf again. And, you're done! 

Topstitch the opening closed, 1/8" from the edge.

Clip any loose threads.

Ta-da! It's done. It's such a quick and easy sewing project. Now, go out and rock that Rockabilly hair!

To wear the scarf:
Place the wide part at the back of your head just covering your hairline. Pull the pointy ends upwards, covering the tops of your ears, and tie in a knot on top of your head. 

This is perfect for messy hair days and curly-haired girls too. To make it into a more formal look, pin curls on top of your head, tie this scarf up, and wear it with a pretty dress.
If you're going for a 40's style, you can pair the scarf with wide-legged trousers and a boxy button-up top. This hair scarf is for anyone looking for a quick and easy retro hairstyle! 

Wide at the back, narrow at the front. Perfect for casual vintage styled hair!

The shape stays on your head throughout the day! Add a bobby pin on each side if it needs more support.

Yep! I love this pattern!

So, what do you think of the pattern? It was easy right? Do you plan on making as many as you can for the summer? I wear my hair up most summer days and this thicker style is what I've been yearning for! Easy & cute hair... yes, please!!! 

If you make one or ten, please tag me on Instagram. I want to see them aallll! Use the hashtag #sewingtothemoonScarf
Let me know in the comments below if you've made this or plan to. I seriously can't tell you how overly excited this whole process made me. :D 

Thanks for all the love and support on social and here! Sewing people are the best people. 

​Happily sewing,

Annette

This website uses marketing and tracking technologies. Opting out of this will opt you out of all cookies, except for those needed to run the website. Note that some products may not work as well without tracking cookies.

Opt Out of Cookies