Stash Buster: Gathered Skirts

I have a silly question for you. Do you ever buy fabric without knowing what you'll make with it? 

Quietly raises a hand, I'm guilty of this. #fabrichoarder

Well, boredom set in on a Friday night and I didn't have to taxi kids around.

So, I opted for the ole "cereal for dinner" mantra. 

And I took a whole afternoon turned to night, for me. And did some selfish sewing.

I looked in my stash and had Halloween fabric I bought years...and years ago. I also had some fun with Jetson's fabric. I'm a  child of the 80's after all. It was a stash-busting selfish sewing kind of night.

I always buy at least 2 yards of fabric, especially If I'm unsure what it'll get used for. You can usually get a skirt, a top, or a blanket and matching items for a baby gift, etc. out of 2 yards.

All I needed was 2 yards of fabric, an invisible zipper, and coffee. 

Jetsons fabric gathered skirt. This is my favorite fabric.

I decided to make three gathered skirts for my wild and crazy Friday night. 

Super simple self-drafted pattern and cut them out assembly style. Then, sewed them up. I used an invisible zipper on each and opted out of adding pockets. Although, I regret that decision now. When making your own skirts, always add pockets! Pockets are life!

My pinup zombie Halloween gathered skirt

If you've never made a gathered skirt, do a quick Google search and draft a pattern. They are super easy and fun. Perfect for quilting cotton fabrics too. Yay! We all have those fun novelty prints in our stash. Just make sure you pre-wash that fabric. And... bonus, different fabrics will change the look of the skirt. Velvet and taffeta make great holiday party skirts, as where gingham will create a casual Sunday skirt.

That's it. This was a short and simple post and I hope you enjoyed it.

Now go do some selfish stash busting sewing! 

Yours skirt-wearing friend,

Annette

Brother PQ1500SL Sewing Machine Review

How are you? Safe and sane, hopefully. Things are crazy around here, but we're getting used to our new "normal". Will life ever go back to the way it was? Who knows.

Let's talk about mask making for a second. Whew! What a whirlwind that is, amiright? I've never made hundreds of one item before, until I decided to sew face masks. They were needed everywhere overnight. I've donated them, sold them, made them for friends and family, etc., just like most of us in the sewing community. 

Just like many of you, I got tired of sewing masks. Making the same thing over and over takes a toll on you. Mind, body, spirit, and soul.  

At some point in the midst of mask making, a new sewing machine was ordered, by magical fairies who love me, presumably. I had my eyes set on this particular one for a couple of years. It wasn't an essential item, but with all the necessary sewing going on, I allowed it.

They sent me the wrong machine at first, and then finally, 2 weeks later the correct machine arrived. Wheeee!! I was so excited.

Although, hesitation and fear kept me from opening it right away. What if I didn't love it? Maybe it was too advanced for me. It is a straight stitch only machine, after all. It sat outside for 24 hours to decontaminate before opening up the box and bringing it inside. Crazy, I know.

Let me start off by saying, WOW! She's a beast! She’s heavy and the box was huuuge!

My new Brother PQ1500SL sewing machine was here and itching to be used. And, holy cow, she exceeded all my expectations and some. 

The machine came with a plethora of accessories and I totally nerded out on all of these, of course! 

The machine has a large extension table that is dreamy. It came with multiple feet including a whopper of a walking foot. 

Threading is as easy as pie. Winding the bobbin is easy as well. 

It doesn't have a drop-in bobbin, which I thought would be annoying. However, it's easy to change because there are 3 doors that open up, making it convenient to change during a project. 

A fun surprise that was included was a loaded bobbin. I've bought a few new machines in my almost 20 years of sewing, and they've never come with a loaded bobbin! This was exciting for me. It really is the little things.

Or I lost my marbles after making hundreds of masks, and any small thing was pure joy at this point. Who knows!

Once I received my new Brother sewing machine, I got a second mask-making wind. I was so antsy to use it. Give a kid a new toy, of course they want to play with it right away!

Sewed the first mask beautifully.

Nevermind the stack of things that I started and couldn't finish before the pandemic. I couldn't sew something for myself during a crisis, that just felt wrong to me. So, I made more masks. So many more masks. But, they were made with a big smile because I had a shiny new toy. 

The machine came with a fully loaded bobbin! You wind the thread up and around to the cutter. So easy and convenient. No pulling the thread up with upper thread.

I'm a sucker for accessories! Do you love gadgets and get excited to use them? Here's everything it came with. 

Feet galore

1. Zipper foot

2. invisible zipper foot

3. Walking foot

4. Rolled hem foot

5. 1/4" foot

6. Pin feed foot

7. Free motion quilting foot

8. Seam guide

9. Feed pin and lining plate screws

10. Fabric Separator

Walking foot to help with quilting and sewing many layers. A YKK invisible zipper foot.

That particular invisible zipper foot in the photo above is the greatest thing I've ever used! I sew a lot of invisible zippers into my clothes, I'm familiar with invisible zipper feet. But, my metal go-to foot has nothing on that plastic YKK beauty! It even looks different, see the pointy middle part? It's a game-changer. I didn't have to pull and yank and coax the zipper while I sewed it in. It just did its own thing and we sewed in harmonial bliss. It's a high-shank foot, so check what type of sewing machine you have before you order this puppy. But, if you use invisible zips often, get yourself one. You won't regret it. ;) I saw them on Amazon and online shops, look for a Juki invisible zipper foot.

More Accessories

• 5 bobbins

• 6 extra needles

• Lint cleaning brush

• Small screwdriver and medium screwdriver

• Spool cap and net

• Feed pin changer

• Extension table with measuring strip on it

• Knee lift

• Spool Cushion

• Soft machine cover

• Knee lift and fabric extension table

Sewing Machine cover. It only fits if you remove the table and knee lift.

The machine came with a cover made of vinyl and has a thin layer of foam inside the front and back. It's nice and roomy. It says "For Professional Use" on the front and that makes me feel all professional-like. No big deal. ;)

You have to remove the table for the cover to fit properly. But, I plop the cover over the machine and call it a day.

The machine without the table. I have come to absolutely love the knee lift. I don’t know how I ever sewed without it.

Onto the fun part, the actual sewing. Squeee!!

I had a minor hiccup in the beginning because the bobbin wasn't "clicked" in all the way. Once that was figured out, we were good to go. Just make sure it makes a loud click.  If you get a new sewing machine or serger, it's good practice to load the bobbin and thread the machine a few times. It helps you get familiar with the motions. I loaded 2 bobbins and those went smoothly, a little louder than a plastic bobbin, but they wound quickly and evenly. 

Threading the upper thread was easy. It's a tad different than my other home sewing machines because the tension discs are on the outside. The manual walks you through the process and even shows an alternative way to thread if you have tension issues.  Thank you, Mister Manual Writer, or Miss. ;) 

The Brother PQ1500SL does not alert you when the bobbin is running out. My other Brother machines make a warning beep when the bobbin is low. I thought this would be frustrating because let's be honest, it's nice to know when the bobbin is empty before you've sewn a whole pant leg. But... I prefer not to know! My other machine starts beeping at you and stops you from sewing, a good 2 feet of length before the bobbin is empty. I get frustrated and it's more hassle than it's worth. 

Not knowing when I'll run out is much less stressful. I sew until I notice my seam is wonky. I take the bobbin out, load it, and pop it back in. Quick and painless. No annoying beep. Woohoo!!

This machine only sews straight stitches, nothing else. I will have to use another machine when I sew my bras and other things that need a zigzag. No biggy.

I cannot wait to sew a pair of pants on this machine, it's so fast and will sew a long inseam in a jiffy. 1500 stitches per minute (SPM) is life-altering! I used to count the seconds of my life go by while sewing with my much slower 400 SPM machine. LOL

The Brother PQ1500SL has a pin feed system and I honestly have not played with that part, yet. I'll update the post when I figure that all out. UPDATE: I’ve used it a few times. It’s made for sewing with velvet. I made two Gardner tops while using it. They turned out beautifully. Grab that post here.

But, it has a pin that feeds from below the feed dogs, upwards. It pokes the fabric layers and helps move them along. I assume it's similar to a walking foot, in theory. The manual says to use it with difficult fabric like velvet, leather, and suede.

I've sewn close to 100 masks and a Rita Blouse with the machine since it arrived. 

I've test-sewn through a small variety of fabrics- super thin cotton, stretchy poplin, elastic, stretch knit, denim, and sheer fabrics. It didn't eat the thin cotton or sheer fabrics. It went over the mask pleats easily too, with no crunching sound like on my other machines. 

Overall, I'm completely head over heels with this machine. I could kick myself for not buying it sooner. But, I had mom guilt. That guilt where you can't buy something nice for yourself because... kids.

If you're looking to elevate your sewing game, this is the machine for you! It's fast and powerful. I wouldn't necessarily recommend it as a beginner sewing machine. However, if you've been sewing for a while and need more power and more speed, this is for you! I sound like a car salesman, but I’m being serious. Give me all the sewing power and speed!

It doesn't have 400 decorative stitches like many other machines. It's a utility machine for sewing clothing and quilting. I don't quilt, so I can't recommend it for that. But reviews online say it's wonderful for quilting. UPDATE: I have made a few quilts with it and it sews through all the layers easily. It also does free-hand motion like a dream.

Disclaimer: I was not paid by Brother and I'm not sponsored - although I wish I was. Ha! ;) I bought this machine with my own money. And, oh my gosh, every penny was well spent!

Let me know in the comments if you have had your eye on this machine or already have it. Do you love it too? 

Stay safe and healthy, 

Annette

How to Sew a Custom Handbag

I made this cute handbag as a fun little distraction during quarantine. I planned on using it sooner than later, but we all know how that turned out. Ha! Days turned into weeks and it's all a blur from there. 

I had some marine vinyl leftover from another project and I came up with this little purse. 

Want to make a cute little handbag for your next shopping trip?

Here's what you need:

• 1/2 yard of marine vinyl or other faux leather-type fabric

• 1/2 yard of cotton fabric for lining

• Thread

• Sewing machine and notions

• Microtex needle

• Scrap paper for making a pattern

• Ruler and pencil

• Interfacing if needed ( I didn't use any. Gasp, I know)

• Purse feet (optional)

Cut 2 outer, 2 inner, 2 interfacing pieces.

Decide on your sizing

• Start out by ironing any wrinkles in your lining fabric. 

• Grab some paper or cardstock, freezer paper is my go-to because it's inexpensive and wide.

• Figure out how big you want your bag to be. 

• My pattern size is 9" tall x 14" wide.

• Mark 2" square cutouts on the bottom of the pattern. Cut out the paper pattern.

Once your pattern is made and cut out, it's time to trace onto the fabric. Cut out 2 pieces of vinyl and 2 pieces of lining fabric. Iron on or sew in the interfacing to the lining.

Next, cut 2 strips of the marine vinyl 3" wide by 18" long. These will be your purse straps. 

If you'd like to add a pocket, make that now. Decide on the size you want and cut a piece of fabric twice as long. You will fold the fabric in half RTS (right sides together) and sew all around leaving a 3" gap for turning out.

Press the pocket flat after you turn it out. I stuck my phone on top to figure out how wide I wanted my pocket widths to be. They aren't exactly the same width. Draw a line where you want the pockets to separate with chalk or a water-soluble pen.

Pin in place and stitch onto one lining piece. Sew in a "U" shape, do not sew the top you want it to stay open so your items can go inside. Reinforce the openings by backstitching a few times. Press.

Pin sides and bottoms together. Leaving tops open.

Using clips, clip the vinyl pieces, right sides together and pin the lining pieces RST. Sew the sides and bottoms using 1/2" seam allowance. Be sure to leave a 3" gap in the lining for turning out. Press the lining seams open. You shouldn't iron the vinyl, it may melt. Just finger-press those seams. Set both pieces aside.

Let's make the handles

Grab the 2 long strips of vinyl and all your clips. You do not want to use pins because they create permanent holes. Yikes!!

If you don't have fabric clips, use double-sided tape, chip clips, hair clips, your child’s teeth, or anything you think that will be strong enough.

• Fold in half and carefully fold those sides into the middle. It takes some finagling, but you got this! Don't let the vinyl beat you. LOL!!

• Clip along the end once you have it molded into place.

• Sew the open edge first, then the folded edge.

Scroll through the photos to see how to create your handles. I use this method for all of my purse handles.


Grab the purse's outer and inner pieces, you're going to box the corners before sewing everything together.

Boxing the corners is easy, pinch the seams together and sew 1/2" away from the edge. Do this with both lining and outer bag corners.

Your seams and corners should match nicely like the photos above. If they don't match perfectly, no biggie. You'll be the only one who knows and I'm not telling anyone. ;)

*If you have a set of purse feet lying around, you can add those following the feet instructions. I didn't have any, so I didn’t add feet to this purse. They do make a nice addition though. Next time.

Next, you're going to stitch the handles to the bag to keep them in place. Mark how far you want them from the edge. I positioned mine about 2" from the side seams. Make sure they are flipped the correct way and not twisted.

Base stitch them to the bag with a 1/4" seam. This is just to keep them from moving while you sew the bag pieces together.

After the handles are stitched in place, grab the lining piece. Keep the outer bag piece flipped inside out. Turn the lining inside out as well. Both pieces should be facing right sides together. This is important, check twice. ;) You should see the ugly sides of the fabric for both pieces.

Using clips, attach the lining to the outer matching the side seams.

Sew around the top with 1/2" seam.

After you sew the lining to the outer, reach inside and flip the bag out. This takes a little more patience because the vinyl doesn't want to give. Just tell it who's boss and that it'll be happier once it comes to the bright side. It works, I promise!!

Bagging Out

1. Find the lining hole.

2. Reach through the hole and pull the bag through the lining.

3. Pull. Yank, lightly. Pull some more to get the vinyl out.

After you pull out the lining, push it back in and make sure everything fits nicely. Poke out all the corners. 

Look over the handbag and nothing is wonky, and there aren’t any seams with holes, pull the lining out and sew the opening closed. You can do this by hand or machine.

Sew the opening closed.

Stuff the lining back into the bag, topstitch around the whole top, and you're done! Yay!!

I decided to keep the lining showing for an added pop. However, the lining doesn't sit in the bag perfectly after doing this. If you decide you like this look, add 1" in length to your lining pieces. This was a spur-of-the-moment sewing project which are my favorite because I can experiment. I like the bag size for a day out. However, I would make it 2-3" deeper if I used it as an everyday purse.

Oh, and I also added a little tie to the bag as well. If you have enough extra fabric, you can make one too. The white vinyl was just too plain and boring for my taste. 

Cut a strip about 14" long by 5" wide. Fold in half and cut the short ends at an angle, if you'd like. Stitch the open ends, leaving a 2" gap for turning.

Clip your corners, turn out, and press. Stitch the opening closed and tie it onto your bag handle. Now you have a cute accent piece on your purse.

Where are you going to strut your new bag first? The mailbox? The grocery store? The living room? The possibilities are endless. Haha!

Oh, quarantine...

I think I want to try making this bag again but with darker vinyl. The white is fine because it'll wipe clean. But, I'm thinking bright yellow or blue for summer would be fun. Let me know if you make this bag. Remember, you can alter the sizing to your liking- make it taller, wider, shorter, etc. Sewing is the best, isn't it? 

Thanks for sticking around for this tutorial! 

Virtual high fives and hugs,

Annette